Nabavka nameštaja za Studentski dom u Nišu - projekat „Studentsko stanovanje“

TECHNICAL DESCRIPTION.pdf 1.5.1 TECHNICAL DESCRIPTION The goal of this documentation is to equip the St udent Dormitory in Niš, stories : Bsmt+Grd +Flr11+Loft on Lot numbers no. 1928/2 and 1929/9 Cadastral municipality Niš-Crveni Krst. The project of equipping the student dormitory included equipping student rooms, equipping common public spaces (reading rooms, hall, internet cafe, TV room), auxiliary rooms, cloakrooms, and offices. BASEMENT: The equipment project does not include equipping the laundry room with washing, drying, and ironing machines (rooms 14, 15, and 16) in the basement of the building, the janitor's workshop, and the carpenter's workshop (rooms 23, 24, 25) and equipping the gym with exercise equipment in the basement of the building ( room number 20). GROUND LEVEL: The equipment project does not include the equpping of the copy room (room no. 23) and the store (room no. 30) on the ground floor of the building. LOFT: The equipment project does not include the equipping of the laundry room with washing machines (room No. 5) in the loft of the building. EQUIPMENT OF STUDENT ROOMS Student rooms are designed as single, double and triple rooms. Specification of rooms and beds storey single room double room triple room room for the disabled total number of rooms basement / / / / / ground floor / 2 / 2 4 1st floor / 14 3 1 18 2nd floor / 12 3 1 16 3rd floor / 6 / / 6 4th floor / 12 3 1 16 5th floor / 14 3 1 18 6th floor / 14 3 1 18 7th floor / 14 3 1 18 8th floor 2 12 3 1 18 9th floor 2 12 3 1 18 10th floor 2 12 3 1 18 11th floor 2 12 3 1 18 loft / 4 / / 4 total number of rooms 8 140 30 12 190 total number of beds 8 280 90 24 402 Elements provided for equipping: ELEMENTS FOR EQUIPMENT OF SINGLE ROOM: PC 1.1 - desk 120x80x75cm ZP 1.1 - closed wall shelf, dimensions 40x30x70cm ZP 1.2 - open wall shelf, dimensions 120x34x20cm RS 1.2 - chair NO 1 - night table 40x85x48cm K1 - bed 85x205x48cm C1 - shoe rack - shoe storage element 100x40x85cm PL 1.1 - wardrobe for storing clothes 85x57x220cm KL 1 - bench for sitting and storing books, dimensions 180x45x45cm Č 1.1 - coat hanger ELEMENTS FOR EQUIPMENT OF DOUBLE ROOM: RS 1.1 - desk 120x80x75cm x 2 units ZP 1.1 - closed wall shelf, dimensions 40x30x70cm x 2 units ZP 1.2 - open wall shelf, dimensions 120x34x20cm x 2 units RS 1.2 - chair x 2 units NO 1 - night table 40x85x48cm x 2 units K1 - bed 85x205x48cm x 2 units C1 - shoe rack - shoe storage element 100x40x85cm PL 1.1 - wardrobe for storing clothes 85x57x220cm x 2 units Č 1.1 - coat hanger ELEMENTS FOR EQUIPMENT OF TRIPLE ROOM: RS 1.1 - desk 120x80x75cm x 3 units ZP 1.1 - closed wall shelf, dimensions 40x30x70cm x 3 units ZP 1.2 - open wall shelf, dimensions 120x34x20cm x 3 units RS 1.2 – chair x 3 units NO 1 - night table 40x80x48cm x 3 units K1 - bed 85x205x48cm x 3 units C1 - shoe rack - shoe storage element 100x40x85cm PP 1.1/ PP1.2 - dividing shelf - triple room, dimensions 90x30x150cm/245x30x150cm PL 1.1 - wardrobe for storing clothes 85x55x220cm x 3 units Č 1.1 - coat hanger ELEMENTS FOR EQUIPMENT OF THE HALL AND INTERNET CAFE ON THE GROUND FLOOR: RS 3.1 - desk with 6 workplaces 110x305x75cm (2 units) RS 3.2 - desk 60x120x75cm (4 units) S 3.1 - chair (28 units) S 3.2 - chair (4 units) PU 3.1 – work counter (1 unit) PU 3.2 - counter for dispensing drinks (1 unit) ES 3.1 - seating element (18 units) ES 3.2 - seating element (5 units) ELEMENTS FOR EQUIPMENT OF THE READING ROOM (ground floor): RS 3.3 - desk 200x60x75cm (7 units) S 3.3 - chair (14 units) ELEMENTS FOR EQUIPMENT OF THE READING ROOM (2nd floor): RS 3.3 - desk 200x60x75cm (8 units) S 3.3 - chair (19 units ) PU3.3- counter 45x317x280cm ELEMENTS FOR EQUIPMENT OF ONE READING ROOM (3rd floor): RS 3.3 - desk 200x60x75cm (20 units) RS 3.4 - desk 100x60x75cm (5 units) S 3.3 - chair (45 units) ELEMENTS FOR EQUIPMENT OF THE INTERNET CLUB (3rd floor): RS 3.4 - desk 205x120x75cm (5 units) S 3.3 - chair (23 units ) PU3.3 - counter 45x317x280cm ES 3.1 - seating element (2 units) ES 3.2 - seating element (1 unit) ELEMENTS FOR EQUIPMENT OF THE TV ROOM (3rd floor): F 2.1 - armchair 64x75x75cm (24 units) ELEMENTS FOR EQUIPMENT OF THE READING ROOM (4th floor): RS 3.3 - desk 200x60x75cm (8 units) S 3.3 - chair (19 units) PU3.3- counter 45x317x280cm ELEMENTS FOR EQUIPMENT OF COMMON SPACES BY FLOOR: ES 3.3 - chair (2 units ) ES 3.4 - chair (4 units) ELEMENTS FOR EQUIPMENT OF COFFEE BAR: RS 3.2 - Desk 60x120x75cm (8 units) S 3.1 - chair (32 units) S 3.4 - chair (5 units) Š 3.1 - bar counter (1 unit) The equipment project defines the use of venetian blinds in all student rooms, which is part of the architecture project, while panel curtains are planned in the reading rooms and offices, which are part of the bill of quantity of the equipment project. The equipment project does not include the purchase of bedding, blankets, trash cans, inventory lists, and similar items. The reading rooms on the 2nd and 4th floors are designed with 19 seats each. The large reading rooms on the 3rd floor are designed with 45 seats each. The TV room is equipped with armchairs for sitting that can be transformed according to needs and separated or grouped in different ways. On the 3rd floor in the internet club, there are 23 workplaces for students. The cafe in the loft of the building is designed with 37 seats, 32 at tables and 5 at the bar. All furniture manufacturing positions must be carried out according to the general description, scope of work, scheme, and contractor's details or according to the catalog specification of products and systems and in accordance with valid regulations and standards. The contractor is obliged to prepare all the workshop details as well as submit for inspection the appropriate safety certificates and certificates on quality and fulfillment of the conditions set by the project. The installation must be done according to the system manufacturer's recommendations and workshop details based on the dimensions of the positions taken on - site. Grafička dokumentacija_Graphic documentation.doc Grafička dokumentacija za postupak javne nabavke br. OP/D/06/26 dostupna je na sledećem linku: https://drive.google.com/drive/folders/1MoCsUtpjfWF9cUSFdmFzwu2jaUtMh6w0?usp=share_link The graphical documentation for the public procurement procedure No. OP/D/06/26 is available at the following link: https://drive.google.com/drive/folders/1MoCsUtpjfWF9cUSFdmFzwu2jaUtMh6w0?usp=share_link TEHNIČKI OPIS.pdf 1.5 TEKSTUALNA DOKUMENTACIJA 1.5.1 TEHNIČKI OPIS C ilj izrade ove dokumentacije je opremanje objekta Studentskog doma u Nišu, spratnosti Po+P+11+Pk. na KP br. 1928/2 i 1929/9 KO Niš-Crveni Krst. Projekat opremanja objekta studentskog doma obuhvatio je opremanje studentskih soba, opremanje zajedničkih javnih prostora (čitaonice, hol, internet kafe, tv sala) pomoćnih prostorija, garderoba, kancelarija. PODRUM: Projektom opremanja nije obuhvaćeno opremanje vešernice mašinama za pranje, sušenje i peglanje (prostorije 14, 15 i 16) u podrumu objekta, radionice za domara i radionice za stolara (prostorije 23,24,25) i opremanje teretane spravama za vežbanje u podrumu objekta (prostorija broj 20). PRIZEMLJE: Projektom opremanja nije obuhvaćeno opremanje kopirnice (prostorija br.23) i prodavnice (prostorija br.30) na prizemlju objekta. POTKROVLJE Projektom opremanja nije obuhvaćeno opremanje vešernice mašinama za pranje (prostorija br. 5) na potkrovlju objekta. OPREM ANJE STUDENTSKIH SOBA S tudentske sobe projektovane su kao jednokrevetne, dvokrevetne i trokrevetne sobe. S pecifikacija soba i ležajeva Elementi predviđeni za opremanje: ELEM ENTI ZA OPREMANJE JEDNOKREVETNE SOBE: PC 1.1 - radni sto 120x80x75cm ZP 1.1 - zatvorena zidna polica, dimenzija 40x30x70cm ZP 1.2 - otvorena zidna polica, dimenzija 120x34x20cm RS 1.2 - radna stolica NO 1 - noćni ormarić 40x85x48cm K1 - okvir kreveta sa fiokama sa podnicom i dušekom 85x205x48cm C1 - cipelarnik 100x40x85cm PL 1.1 - plakar 85x57x220cm KL 1 - klupica za sedenje i odlaganje knjiga dimenzija 180h45h45cm Č 1.1 - čiviluk ELEM ENTI ZA OPREMANJE DVOKREVETNE SOBE: PC 1.1 - radni sto 120x80x75cm x 2kom ZP 1.1 - zatvorena zidna polica, dimenzija 40x30x70cm x 2kom ZP 1.2 - otvorena zidna polica, dimenzija 120x34x20cm x 2kom RS 1.2 - radna stolica x 2kom NO 1 - noćni ormarić 40x85x48cm x 2kom K1 - okvir kreveta sa fiokama sa podnicom i dušekom 85x205x48cm x 2kom C1 - cipelarnik 100x40x85cm PL 1.1 - plakar 85x57x220cm x 2kom Č 1.1 - čiviluk ELEM ENTI ZA OPREMANJE TROKREVETNE SOBE: PC 1.1 - radni sto 120x80x75cm x 3kom ZP 1.1 - zatvorena zidna polica, dimenzija 40x30x70cm x 3kom ZP 1.2 - otvorena zidna polica, dimenzija 120x34x20cm x 3kom RS 1.2 - radna stolica 3kom NO 1 - noćni ormarić 40x80x48cmx 3kom K1 - okvir kreveta sa fiokama sa podnicom i dušekom 85x205x48cm x 3kom C1 - cipelarnik 100x40x85cm PP 1.1/ PP1.2 - pregradna polica, dimenzija 90x30x150cm/245x30x150cm PL 1.1 - plakar 85x55x220cm x 3kom Č 1.1 - čiviluk ELEMENTI ZA OPREMANJE HOLA I INTERNET KAFEA NA PRIZEMLJU: PC 3.1 - sto 110x305x75cm (komada 2) PC 3.2 - sto 60x120x75cm (komada 4) S 3.1 - stolica (komada 28) S 3.2 - stolica (komada 4) PU 3.1 - radni pult (komada 1) PU 3.2 - pult za izdavanje pića (komada 1) ES 3.1- tapacirani element za sedenje-tabure (komada 18) ES 3.2- tapacirani element za sedenje-tabure (komada 5) ELEMENTI ZA OPREMANJE ČITAONICE (prizemlje): PC 3.3 - radni sto 200x60x75cm (komada 7) S 3.3 - stolica (komada 14) ELEMENTI ZA OPREMANJE ČITAONICE(2.sprat): PC 3.3 - radni sto 200x60x75cm (komada 8) S 3.3 - stolica (komada 19) PU3.3- Radni pult 45x317x280cm ELEMENTI ZA OPREMANJE JEDNE ČITAONICE (3.sprat): PC 3.3 - radni sto 200x60x75cm (komada 20) PC 3.4 - radni sto 100x60x75cm (komada 5) S 3.3 - stolica (komada 45) EL EMENTI ZA OPREMANJE INTERNET KLUBA (3.sprat): PC 3.4 - radni sto 205x120x75cm (komada 5) S 3.3 - stolica (komada 23) PU3.3- Radni pult 45x317x280cm ES 3.1- tapacirani element za sedenje-tabure (komada 2) ES 3.2- tapacirani element za sedenje-tabure (komada 1) EL EMENTI ZA OPREMANJE TV SALE (3.sprat): F 2.1 - Fotelja 64x75x75cm (komada 24) EL EMENTI ZA OPREMANJE ČITAONICE (4.sprat): PC 3.3 - radni sto 200x60x75cm (komada 8) S 3.3 - stolica (komada 19) PU3.3- Radni pult 45x317x280cm E LEMENTI ZA OPREMANJE ZAJEDNIČKIH PROSTORA PO SPRATU: ES 3.3 - stolica (komada 2) ES 3.4 - stolica (komada 4) EL EMENTI ZA OPREMANJE KAFE BARA: PC 3.2 - radni sto 60x120x75cm (komada 8) S 3.1 - stolica (komada 32) S 3.4 - stolica (komada 5) Š 3.1 - šank (komada 1) Projektom opremanja predviđeni su venecijaneri u svim studentskim sobama, što je deo projekta arhitekture, dok su u čitaonicama i kancelarijama predviđene panelne zavese koje su u okviru predmera projekta opremanja. Projektom opremanja ni je obuhvaćen a nabavk a posteljine, ćebadi, kanti za odpatke, inventarskih lista i slično. Čitaonice na 2 i 4.spratu predviđene su sa po 19 mesta za sedenje. Velike čitaonice na 3.spratu predviđene su sa po 45 mesta. Tv sala opremljena je foteljama za sedenje koje se mogu tranformisati u skladu sa potrebama i razdvajati ili grupisati na različite načine. Na 3 spratu u internet klubu predviđena su mesta za rad za 23 studenta. Kafić na potkrovlju objekta predviđen je sa 37 konzumnih mesta 32 za stolovima i 5 za šankom. Sve pozicije izrade nameštaja, potrebno je izvesti u svemu prema opštem opisu, predmeru radova, šemi, izvođačkim detaljima ili prema kataloškoj specifikaciji proizvoda i sistema i u skladu sa važećm propisima i standardima. Izvođač je dužan da izradi sve radioničke detalje kao i da dostavi na uvid odgovarajuće sigurnosne ateste i sertifikate o kvalitetu i ispunjavanju uslova zadatih projektom. Ugradnju je potrebno vršiti u svemu prema preporukama proizvođača sistema i radioničkim detaljima na osnovu dimenzija pozicija uzetih na licu mesta. Obrazac strukture ponuđene cene-Offered Price Structure Form.XLSX Prostorija/Room | Oznaka na crtežu/ The mark on the drawing | Naziv/ Name | Materijal/ Material | Opis | Description | jed. mere/Unit of measure | Količina/ Quantity | Jedinična cena/ Price per units | Ukupna cena/ Total price | Jedinična cena/ Unit price | Ukupna cena/ Total price UKUPNO EURO/ TOTAL EUR | DINARA/ RSD | UKUPNO DINARA/ TOTAL RSD Opšta napomena: Pozicije izvesti u svemu prema opštem opisu, predmeru radova, izvođačkim detaljima ili prema kataloškoj specifikaciji proizvoda i sistema i u skladu sa važećm propisima i standardima. Izvođač je dužan da izradi sve radioničke detalje kao i da dostavi na uvid odgovarajuće sigurnosne ateste i sertifikate o kvalitetu i ispunjavanju uslova zadatih projektom. Ugradnju vršiti u svemu prema preporukama proizvođača sistema i radioničkim detaljima na osnovu dimenzija pozicija uzetih na licu mesta. | General note: The positions must be carried out in all respects according to the general description, scope of works, contractor's details or according to the catalog specification of products and systems and following valid regulations and standards. The contractor is obliged to create all workshop details as well as submit for inspection the appropriate safety attestations and certificates of quality and fulfillment of the conditions set by the project. The installation must be carried out in all respects according to the system manufacturer's recommendations and workshop details based on the dimensions of the positions taken on-site. STUDENTSKE SOBE/ STUDENT ROOMS | K1 | krevet/ bed 85x205 | Univer/ plywood | Nabavka materijala, izrada, transport i montaža kreveta u studentskim sobama. Okvir kreveta je sa podnicom, fiokama i uzglavljem. Krevet je dimenzija da odgovara dušeku 80x200cm,odnosno spoljašnjih dimenzija 85x205cm,visine uzglavlja od 78cm i visine bočnih strana i podnožja 48cm od poda. Konstrukcija kreveta je napravljena od metalnih kutijastih profila 40x40x3mm međusobno spojenih zavarivanjem, plastificiranih u boji Ral 9010, postavljenih horizontalno po obodu kreveta, i vertikalno po obodu i u sredini. Uzglavlje, podnožje i bočne strane su od univera debljine 25mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 28/2mm (tipa EGGER W954 ST2, Falco YI121 FS01 ili sl.). Vezu noseće konstrukcije i univera ostvariti šrafljenjem kroz profil. Krevet ima 2 fioke za odlaganje. Fioke su dubine 60cm i opremljene su teleskopskim klizačima sa izvlačenjem do 100%, nosivosti 40kg (renomiranog proizvođača, tipa Bloom ili drugo). Bočna strana, dno i front fioka su od univera debljine 18mm oplemenjenog melaminskom folijom i kantovanog, u beloj boji (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) , frontovi fioka su urezani zbog otvaranja. Sa unutrašnje strane nosećih profila, postavljaju se ploče od univera na koje se šrafe klizači fioka. Podnica kreveta je oplemenjene iverice debljine 18mm koja mora biti perforirana radi provetravanja dušeka. Predviđena visina dušeka je 18cm. Predvideti moguđnost postavljanja uzglavlja sa obe strane, u zavisnosti od položaja kreveta. | Procurement of materials, production, transport and installation of beds in student rooms. The bed frame has a floor, drawers, and a headboard. The dimensions of the bed correspond to the mattress 80x200cm, apropos the external dimensions are 85x205cm, the height of the headboard is 78cm, and the height of the sides and footboard is 48cm from the floor. The construction of the bed is made of metal box profiles 40x40x3mm joined together by welding, plasticized in the color Ral 9010, placed horizontally around the perimeter of the bed, and vertically along the perimeter and in the middle. The headboard, base, and sides are made of 25mm thick plywood, refined with melamine foil and edged ABS tape in white color 28/2mm (type EGGER W954 ST2, Falco YI121 FS01 or similar). The connection between the supporting structure and the unit can be achieved by screwing through the profile. The bed has 2 drawers for storage. The drawers are 60 cm deep and they are equipped with telescopic slides with pull-outs up to 100%, and 40 kg of carrying capacity (from a renowned manufacturer, type Bloom, or others). The bedside, bottom, and front of the drawer are made of 18mm thick plywood, refined with melamine foil and edging, in white color (type EGGER W954 ST2, Falco YI121 FS01 or similar), and the drawer fronts are notched for opening. On the inside of the supporting profiles, plywood panels are placed onto which the drawer slides are screwed. The floor of the bed is 18 mm thick chipboard, which must be perforated to ventilate the mattress. The expected height of the mattress is 18 cm. Provide the possibility of placing the headboard on both sides, depending on the position of the bed. | kom./ units | 402 | 0 | 0 D1 | dušek/ mattress 80x200x18cm | Nabavka materijala, izrada, transport i montaža dušeka Dušek dimenzija 80x200 cm, sa jezgrom 78x188x14 i debljina žice 2.2 mm. Boks od sunđera oko jezgra od 2 cm debljine (gustina sunđera C25). Filc sa obe strane jezgra (800 g tvrdo pečeni). Sunđer 80x200x2 cm (C25) sa obe strane. Dušečni materijal – aulast platno 100% poliester 190 g/m² + 3% štepan sa 200 g/m² kofilinom sa obe strane. Autplast platno se mora sastojati od dva sloja. Ponuđač je u obavezi da uz ponudu dostavi dokaz (potvrdu, sertifikat i slično) izdat od strane proizvođača o aulast platnu kojim se dokazuje sastav platna. | Procurement of materials, manufacture, transportation, and installation of mattresses. The mattress shall have overall dimensions of 80 × 200 cm, with an inner spring core measuring 78 × 188 × 14 cm and a spring wire diameter of 2.2 mm. The core shall be enclosed by a 2 cm thick polyurethane foam box (foam density C25). Hard felt (800 g/m²) shall be provided on both sides of the core, together with polyurethane foam layers measuring 80 × 200 × 2 cm (density C25). The mattress cover shall be made of Aulast fabric consisting of 100% polyester, 190 g/m², quilted on both sides with 200 g/m² polyester wadding (kofilin). The Aulast fabric shall consist of two layers. The Tenderer shall submit, as part of the tender, documentary evidence (such as a manufacturer's certificate, confirmation, or equivalent document) issued by the manufacturer of the Aulast fabric, confirming the composition of the fabric. | kom./ units | 402 | 0 | 0 RS 1.1 | radni sto 120x80x75 | Univer / čelik / plywood/ steel | Nabavka materijala, izrada, transport i montaža radnog stola. Radni sto dimenzija 120x80cm, visine 75cm, napravljen od nogara od udvojenih univer ploča ukupne debljine 36mm i nogara od čelika i radne ploče od univera debljine 36mm. Sa zadnje strane stola predvideti ploču od univera debljine 36mm, radi ukrućenja. Završna obrada ploča nogara i radne ploče je melaminska folija u dezenu hrast natur (tipa kao EGGER H1318 ST10, Falco 577 Sonoma svetli hrast ili sl). Sve ivice su kantovane ABS trakom d=2 mm u dezenu kao i ploče. Završna obrada čelika je epoksidni/poliesterski premaz u prahu u boji antracit RAL 7016. Nogari stola su oslonjeni na pod preko skrivenih stopica. Sve elemente međusobno spajati lepkom za drvo,tiplovanjem i šrafljenjem. | Procurement of materials, production, transport and installation of the desk. Desk with dimensions 120x80 cm, height 75 cm, made of legs which are made of double universal boards with a total thickness of 36 mm and steel legs and a desk worktop made of plywood with a thickness of 36 mm. At the back of the table, there's a 36-millimeter-thick plate of plywood, for fixing. The final cut of the footboard and worktop is a aluminium foil in the design of a natural cross (type EEGGER H1318 ST10, Falco 577 Sonoma light cross or similarly). All edges are edged with ABS tape d=2 mm in the pattern as well as panels. The final treatment of the steel is an epoxy/polyester powder coating in the color anthracite RAL 7016. The table legs are supported on the floor by the hidden pillars. All elements must be joined together with wood glue, doweling, and screwing. | kom./ units | 402 | 0 | 0 | 0 RS 1.2 | radna stolica/ chair | tekstil/ metal/ textile/metal | Nabavka materijala, izrada, transport i montaža radne stolice u studentskim sobama Stolica je anatomske forme. Sedište tapacirano u tekstilu, naslon u mrežici, boja tekstila i mrežice u crnoj boji. Stolica ima gas lift i mehanizam sa podešavanjem ugla naslona i zaključavanjem u više položaja. Baza stolice je u plastičnoj crnoj boji sa 5 točkića. Sedište i naslon stolica treba da ima sertifikat I kategorije o zapaljivosti i statičkoj provodljivosti. Garancija na mehanizam i konstrukciju minimum 12 godina, na materijal minimum 5 godina i na gas lift minimum 5 godina. | Procurement of materials, fabrication, transportation, and installation of work chairs for student rooms. The chair shall have an ergonomic design. The seat shall be upholstered in fabric, and the backrest shall be made of mesh. Both the fabric and the mesh shall be black in color. The chair shall be equipped with a gas lift and a mechanism allowing backrest angle adjustment with locking in multiple positions. The chair shall have a black plastic five-star base fitted with five castors. The seat and backrest shall be certified as Category I for flammability and electrostatic conductivity. The minimum warranty period shall be 12 years for the mechanism and structural frame, 5 years for the upholstery/materials, and 5 years for the gas lift. | kom./ units | 402 | 0 | 0 | 0 PL 1.1 | plakar za odlaganje garderobe/ wardrobe for storing clothes 85x57x220 | Univer/ plywood | Nabavka materijala, izrada, transport i montaža garderobnih ormana u studentskim sobama. Garderobni orman u studentskim sobama je dvokrilni, dimenzija 85x57x220cm. Korpus ormana kao i frontovi su izrađeni od univera d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.). Leđa ormana su izrađena od HDF-a (lesonita) debljine 3mm u beloj boji. Police su od univera debljine 18 mm u beloj boji a nosači polica su metalni sa metalnim šiljkom i euro vijkom-za vezu sa stranicom korpusa. U širem delu ormana minimalni broj polica je dve, a u užem delu četiri police.Na bočnim stranama predvideti veći broj otvora za nosače polica na rastojanju od 10cm radi mogućnsti pomeranja polica prema potrebi. U delu ormana predviđenom za vešalice postaviti poprečnu prečku za kačenje garderobe na visini 170cm od poda. Orman snabdeti ravnim šarkama bez usporivača, testiranim na 100 000 otvaranja, renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće). Vrata ormana se otvaraju pomoću skrivene Al ručice-profila plastificirane u boji RAL 9010 dužine 50cm, postavljene na visini 80cm (donja ivica ručke na visini 80cm od poda). Sve elemente ormana međusobno spajati lepkom za drvo, tiplovanjem ili šrafljenjem. Orman je oslonjen na pod preko skrivenih štelujućih PVC nogara, 4 na uglovima i jedne ispod unutrašnje vertikalne pregrade ormana. PVC nogari se skrivaju postavljanjem PVC sokle visine 10cm, sa prednje i obe bočne strane ormara koja se pričvršćuje žabicama za nogare. | Procurement of materials, production, transport and installation of wardrobes in student rooms. The wardrobe in the student rooms is double-winged, with dimensions 85x57x220cm. The body of the case as well as the fronts are made of 18mm plywood reinforced aluminum foil and 22/2mm cantilevered ABS track in white paint (type EGGER W954 ST2, Falco YI121 FS01 or similar). The backs of the cabinets are made of 3 mm thick HDF in white. The shelves are made of 18 mm thick plywood in white and the shelf holders are metal with a metal spike and a euro wick for the binding to the side of the case. In the widest part of the cabinet, the minimum number of shelves is two, and in the narrowest part four shelves. Provide a larger number of shelf-bearer openings on the sides at a distance of 10 cm to allow shelves to be moved as needed. In the part of the wardrobe provided for the hangers, place a transverse barrier for the climbing of the wardrobe at a height of 170 cm from the floor. Wardrobe is supplied with a flat, non-slow-acting, 100,000-hole-tested, well-known manufacturer of "Blum", "HAFELE" (or equivalent). The door of the cabinet shall be opened by means of a concealed Al handle-profile plasticized in RAL 9010 color, 50 cm long, placed at a height of 80 cm (the bottom edge of the handle at a height of 80 cm from the floor). All the elements of a wardrobe can be joined together by a wooden handle, a tap, or a scraper. The cabinet is supported on the floor by over-concealed sheathed PVC studs, 4 at the corners and one under the internal vertical partition of the cabinet. The PVC scissors are concealed by placing a PVC socket 10 cm high, on the front and both sides of the cabinet, which is attached to the scissor hooks. | kom./ units | 402 | 0 | 0 | 0 NO 1 | noćni ormarić/ night table 40x85x48 | Univer/ plywood | Nabavka materijala, izrada, transport i montaža noćnih ormarića u studentskim sobama. Noćni ormarić dimenzija 40x85cm visine 48cm (visina je jednaka visini kreveta) sastoji se iz dva dela, i to, police za odlaganje u prednjem delu i dela u obliku sanduka za odlaganje koji se otvara sa gornje strane elementa. Korpus elementa kao i frontovi i leđa elementa su izrađeni od univera d=18 mm, oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.). Za otvaranje elementa sa gornje strane predviđene su ,,klavir ''šarke renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće) , atestirane na 100000 otvaranja. Vrata sa gornje strane elementa se otvaraju pomoću Al ,,L '' ručce-profila plastificirane u boji RAL 9010, dužine 25cm. Polica je urađena od univera debljine 18 mm takođe u beloj boji (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.), a nosači police su metalni sa metalnim šiljkom i euro vijkom-za vezu sa stranicom korpusa. Ormarić se oslanja na pod preko stopica debljine 5mm. Sve ploče međusobno spajati spajati lepkom za drvo, tiplovanjem ili šrafljenjem. | Procurement materials, production, transportation and installation of nightstands in student rooms. A night cabinet with dimensions of 40x85 cm and a height of 48 cm (height is equal to the height of the bed) consists of two parts, namely a storage shelf in the front part and a part in the form of a storage chest that opens from the top of the element. The body of the element as well as the fronts and backs of the element are made of univer 18 mm, refined with aluminium foil and edged with ABS tape in white color 22/2 mm(type EGGER W954 ST2, Falco YI121 FS01 or similar). For the opening element from the upper side, "piano" hinges of renowned manufacturers such as "Blum", "HAFELE" (or similar) are provided, certified for 100,000 openings. The door from the upper side of the element is opened using Al, "L" profile handles plasticized in color RAL 9010, length 25 cm. The shelf is made of 18 mm thick plywood, also in white color (type EGGER W954 ST2, Falco YI121 FS01 or similar), and the shelf supports are metal with a metal spike and a euro screw for connection to the body side. The cabinet rests on the floor supported by 5mm thick feet. All panels are connected to each other with wood glue, doweling or screwing. | kom./ units | 402 | 0 | 0 | 0 C 1 | cipelarnik -element za odlaganje obuće/ shoe rack - shoe storage element 100x40x85cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža cipelarnika u studentskim sobama. Niski element za odlaganje obuće-cipelarnik dimenzija 100x40x85cm sastoji se iz dve zatvorene pregrade i jedne otvorene police. Korpus elementa kao i frontovi su izrađeni od univera debljine 18 mm, oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.). Leđa elementa su izrađena od HDF-a (lesonita) debljine 4mm u beloj boji. Otvarajući delovi snabdeveni su šarkama i mehanizmom za otvaranje tzv ,, makazama'' sa obe strane. Vrata elementa se otvaraju pomoću Al ,,L '' ručce-profila plastificirane u boji RAL 9010. Police unutar elementa su od univera debljine 18 mm takođe u beloj boji (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.), a nosači police su metalni sa metalnim šiljkom i euro vijkom-za vezu sa stranicom korpusa. Šarke su renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće) , atestirane na 100000 otvaranja. Gornji, otvoreni deo cipelarnika je urađen od univera debljine d=18 mm, oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) Cipelarnik se oslanja na pod preko stopica debljine 5mm. Sve ploče međusobno spajati spajati lepkom za drvo, tiplovanjem ili šrafljenjem. | Procurement of materials, production, transport and installation of shoe racks in student rooms. Low element for storing shoes - shoe rack with dimensions 100x40x85 cm consists of two closed compartments and one open shelf. The body of the element as well as the fronts are made of plywood with a thickness of 18 mm, refined with melamine foil and edged with ABS strip in white color 22/2mm (type EGGER W954 ST2, Falco YI121 FS01 or similar). The back of the element is made of 4mm thick HDF (hardboard) in white color. The opening parts are equipped with hinges and a so-called opening mechanism "scissors" on both sides. The door of the element is opened using an Al "L" profile handle plasticized in RAL 9010. The shelves inside the element are made of 18 mm thick plywood, also in white color (type EGGER W954 ST2, Falco YI121 FS01 or similar), and the shelf supports are metal with a metal spike and a euro screw for connection to the side of the body. The hinges are from renowned manufacturers of the type "Blum", "HAFELE" (or similar), certified for 100,000 openings. The upper, open part of the shoe rack is made of plywood with a thickness of 18 mm, refined with melamine foil and edged with ABS tape in white color 22/2 mm (type EGGER W954 ST2, Falco YI121 FS01 or similar). The shoe rack rests on the floor supported by 5mm thick feet. All panels are connected to each other with wood glue, doweling or screwing. | kom./ units | 190 | 0 | 0 | 0 KL 1 | klupica za sedenje i odlaganje knjiga/ bench for sitting and storing books 180x45x45cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža klupica u studentskim sobama. Niski element-klupica za sedenje i odlaganje knjiga dimenzija 180cmh45cmh45cm sastoji se iz tri otvorene pregrade. Korpus elementa je izrađen od udvojenog univera ukupne debljine 3,6cm oplemenjenog melaminskom folijom i kantovanog ABS trakom 2mm u sivoj boji (tipa EGGER U 963 ST9 18mm Diamond Grey ili sl.) i vertikalnih pregrada ukupne debljine 2,5cm oplemenjenog melaminskom folijom i kantovanog ABS trakom u istoj sivoj boji. Klupica se oslanja na pod preko stopica debljine 5mm.Sve ploče međusobno spajati spajati lepkom za drvo, tiplovanjem ili šrafljenjem. | Procurement of materials, production, transport and installation of benches in student rooms. Low element - bench for sitting and storing books, dimensions 180cmx45cmx45cm, consists of three open compartments. The body of the element is made of double plywood with a total thickness of 3.6cm, refined with aluminium foil and edged ABS with 2mm tape in gray color (egger type U 963 ST9 18mm Diamond Gray or similar) and vertical partitions with a total thickness of 2.5cm, refined with aluminium foil and edged with ABS tape in the same gray color. The bench rests on the floor supported by 5mm thick feet. All panels are connected to each other with wood glue, doweling or screwing. | kom./ units | 52 | 0 | 0 | 0 ZP 1.1 | zatvorena zidna polica/ closed wall shelf 40x30x70cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža zidnih polica u studentskim sobama. Zatvorena zidna polica, dimenzija 40x30cm, visine 70cm. Korpus police je izrađeno od univera d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) Leđa ormana su izrađena od HDF-a (lesonita) debljine 3mm u beloj boji. Unutar elementa je jedna polica od univera debljine 18 mm takođe u beloj boji (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) a nosač police je metalni sa metalnim šiljkom i euro vijkom-za vezu sa stranicom korpusa. Šarke su renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće) , atestirane na 100000 otvaranja. Vrata se otvaraju pomoću skrivene Al ručice-profila plastificirane u boji RAL 9010 dužine 25cm, postavljene centralno. Sve ploče međusobno spajati spajati lepkom za drvo, tiplovanjem ili šrafljenjem. | Procurement of materials, production, transport and installation of wall shelves in student rooms. Closed wall shelf, dimensions 40x30cm, height 70cm. The body of the shelf is made of plywood, dimensions d=18mm, refined with aluminium foil and edged with ABS tape in white color 22/2mm (EGGER type) W954 ST2, Falco YI121 FS01 or similar). The back of the cabinet is made of HDF (plywood) 3 mm thick in white color. Inside the element is one shelf made of 18 mm thick plywood also in white color (type EGGER W954 ST2, Falco YI121 FS01 or similar) and the shelf support is metal, with a metal spike and a euro screw - for connection to the side of the body. The hinges are from renowned manufacturers of the type "Blum", "HAFELE" (or similar), certified for 100,000 openings. The door opens using a hidden Al profile handle plasticized in RAL 9010 color, 25 cm long, placed centrally. All panels are connected to each other with wood glue, doweling or screwing. | kom./ units | 392 | 0 | 0 | 0 ZP 1.2 | otvorena zidna polica/ open wall shelf 120x34x20cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža zidnih polica u studentskim sobama. Otvorena zidna polica, dimenzija 120x34x20cm. Korpus police je izrađen od univera d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom 22/2mm u sivoj boji (tipa EGGER U 963 ST9 18mm Diamond Grey ili sl.) Policu snabdeti ,,leđima'' na levom ili desnom kraju police u širini od 10cm, uvučeno u odnosu na ravan zida 5cm, kako bi se omogućilo sakrivanje transformatora za LED svetlo. Sve ploče međusobno spajati lepkom za drvo, tiplovanjem ili šrafljenjem. Police koje se nalaze iznad radnih stolova ( 324 od ukupno 364) potrebno je snabdeti kanalicom sa led trakom ispod donje strane police (led trake sa transformatorima su predmet projekta elektroinstalacija). Police u trokrevetnim sobama koje su iznad kreveta nisu snabdevene LED trakom ( 40 od ukupno 364). Policu kačiti pomoću skrivenih nosača šrafljenjem i tiplovanjem u zid. | Procurement of materials, production, transport and installation of wall shelves in student rooms. Open wall shelf, dimensions 120x34x20cm. The body of the shelf is made of plywood d=18mm, finished with melamine foil and edged with ABS tape 22/2mm in gray color (EGGER U 963 ST9 type, 18mm Diamond Gray or similar). Provide the shelf with "backs" on the left or right end of the shelf with a width of 10cm, indented in relation to the plane of the wall by 5cm, in order to enable hiding the transformer for the LED light. Connect all panels together with wood glue, by doweling or screwing. The shelves that are above the desks (324 out of a total of 364) need to be supplied with a channel with led strip under the bottom side of the shelf (led strips with transformers are the subject of the electrical installation project). Shelves in triple rooms that are above the beds are not supplied LED strip (40 out of a total of 364). Hang the shelf using hidden brackets by screwing and doweling it into the wall. | kom./ units | 364 | 0 | 0 | 0 ZP 1.3 | otvorena polica/ open shelf 120x34x20cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža polica na radnim stolovima u studentskim sobama. Otvorena polica koja se montira na radni sto, dimenzija 120x34x20cm. Korpus police, kao i leđa su izrađena od univera d=18mm oplemenjenog melaminskom folijom u dezenu hrast natur (tipa kao EGGER H1318 ST10, Falco 577 Sonoma svetli hrast ili sl) i kantovanog ABS trakom u boji kao i ploče. Policu snabdeti duplim ,,leđima'' na levom ili desnom kraju police u širini od 10cm, uvučeno u odnosu na ravan ploče 5cm, kako bi se omogućilo sakrivanje transformatora za LED svetlo. Police je snabdevena kanalicom sa led trakom ispod donje strane gornjeg korpusa police (led trake sa transformatorima su predmet projekta elektroinstalacija). Sve ploče međusobno spajati lepkom za drvo, tiplovanjem ili šrafljenjem. Polica se šrafi za radnu površinu stola ugaonicima. | Procurement of materials, production, transport and installation of shelves on desks in student rooms. An open shelf that is mounted on a desk, dimensions 120x34x20cm. The body of the shelf, as well as the back, are made of plywood d=18mm, finished with aluminium foil in a natural oak pattern ( type such as EGGER H1318 ST10, Falco 577 Sonoma light oak or similar) and edged with ABS tape in the same color as the panels. Provide the shelf with double "backs" on the left or right end of the shelf with a width of 10 cm, indented in relation to the plane of the panel by 5 cm, in order to make it possible to hide the transformer for the LED light. The shelf is supplied with a channel with LED tape under the bottom of the upper body of the shelf (LED tapes with transformers are the subject of the electrical installation project). Connect all panels to each other with wood glue, doweling or screwing. The shelf is screwed for the working surface of the table with corners. | kom./ units | 28 | 0 | 0 | 0 PP 1.1 | pregradna polica - trokrevetna soba/ dividing shelf - triple room 85x30x150cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža pregradnih polica u trokrevetnim studentskim sobama. Pregradna polica, dimenzija 85x30x150cm. Korpus police je izrađen od univera d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) Gornji deo police je sastavljen iz 9 otvorenih polja, u pravilnom rasporedu 3x3, dok je donji deo police visine 48cm predviđen kao zatvoren, sa otvarajućim krilima (ukupno 3). Leđa ormana u donjem zatvorenom delu police su izrađena od HDF-a (lesonita) debljine 3mm u beloj boji. Otvarajuća krila su snabdevena kolenastim šarkama renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće) , atestiranim na 100000 otvaranja. Vrata se otvaraju pomoću ,,PUSH'' mehanizma za frontove. Polica se oslanja na pod preko stopica debljine 5mm. Policu šrafiti bočno u zid. Sve ploče međusobno spajati lepkom za drvo, tiplovanjem ili šrafljenjem. | Procurement of materials, production, transport and installation of dividing shelves in three-bed student rooms. Dividing shelf, dimensions 85x30x150cm. The body of the shelf is made of plywood d=18mm refined with aluminium foil and edging with ABS tape in white color 22/2mm (type EGGER W954 ST2, Falco YI121 FS01 or similar). The upper part of the shelf is composed of 9 open fields, in a regular arrangement of 3x3, while the lower part of the shelf with a height of 48 cm is designed as closed, with opening wings (3 in total). The back of the cabinet in the lower closed part of the shelf is made of HDF (hardboard) 3mm thick in white color. The opening wings are equipped with knee hinges of renowned manufacturers of the type "Blum", or "HAFELE" (or similar), certified for 100,000 openings. The doors are opened using the "PUSH" " mechanism for the fronts. The shelf rests on the floor supported by 5mm thick feet. Screw the shelf laterally into the wall. Connect all panels together with wood glue, doweling or screwing. | kom./ units | 20 | 0 | 0 | 0 PP 1.2 | pregradna polica - trokrevetna soba/ dividing shelf - triple room 245x25x150cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža pregradnih polica u trokrevetnim studentskim sobama. Pregradna polica, dimenzija 245x25x150cm. Korpus police je izrađen od univera d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) Gornji deo police je sastavljen iz 18 otvorenih polja, u pravilnom rasporedu 6x3, dok je donji deo police visine 48cm predviđen kao zatvoren, sa otvarajućim krilima (ukupno 6). Leđa ormana u donjem zatvorenom delu police su izrađena od HDF-a (lesonita) debljine 3mm u beloj boji. Otvarajuća krila su snabdevena kolenastim šarkama renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće) , atestiranim na 100000 otvaranja. Vrata se otvaraju pomoću ,,PUSH'' mehanizma za frontove. Polica se oslanja na pod preko stopica debljine 5mm. Policu šrafiti bočno u zid i po potrebi u pod. Sve ploče međusobno spajati lepkom za drvo, tiplovanjem ili šrafljenjem. | Procurement of materials, production, transport and installation of dividing shelves in three-bed student rooms. Dividing shelf, dimensions 85x30x150cm. The body of the shelf is made of plywood d=18mm refined with aluminium foil and edging with ABS tape in white color 22/2mm (type EGGER W954 ST2, Falco YI121 FS01 or similar). The upper part of the shelf is composed of 9 open fields, in a regular arrangement of 3x3, while the lower part of the shelf with a height of 48 cm is designed as closed, with opening wings (3 in total). The back of the cabinet in the lower closed part of the shelf is made of HDF (hardboard) 3mm thick in white color. The opening wings are equipped with knee hinges of renowned manufacturers of the type "Blum", or "HAFELE" (or similar), certified for 100,000 openings. The doors are opened using the "PUSH" " mechanism for the fronts. The shelf rests on the floor supported by 5mm thick feet. Screw the shelf laterally into the wall. Connect all panels together with wood glue, doweling or screwing. | kom./ units | 10 | 0 | 0 | 0 Č 1.1 | Čiviluk/ coat hanger | Univer/ plywood | Nabavka materijala, izrada, transport i montaža čiviluka u studentskim sobama. Zidni čiviluk, dimenzija 30x8x1.8cm. Čiviluk je izrađen od univera d=18mm d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.) Čiviluk je sa tri kuke u beloj boji. Čiviluci se montiraju na zidu, iznad cipelarnika, na visini 180cm od poda. U jednokrevetnim sobama montirati jedan, dvokrevetnim sobama montirati dva, u trokrevetnim tri komada.Čiviluk kačiti šrafljenjem i tiplovanjem u zid. | Procurement of materials, production, transport and installation of wall tiles in student rooms. Wall coat hanger, dimensions 30x8x1.8cm. The coat hanger is made of plywood 18mm refined with melamine foil and edged with ABS tape in white color 22/2mm (EGGER W954 type, ST2, Falco YI121 FS01 or similar). The shelf has three hooks in white color. The shelves are mounted on the wall, above the shoe cabinet, at a height of 180 cm from the floor. In single bedrooms, install one, in double bedrooms, install two, in thriple bedrooms, three pieces. Hang by screwing and doweling in the wall. | kom./ units | 402 | 0 | 0 | 0 PROSTORIJE ZA ZAPOSLENE/PREMISES FOR EMPLOYEES | RS 2.1 | radni sto/ desk 150*80 | Univer/ plywood | Nabavka materijala, izrada, transport i montaža radnog stola u kancelarijama. Radni sto dimenzija 150x80cm, visine 75cm, napravljen od nogara od univer ploča debljine 25mm i radne ploče od univera ploče debljine 25mm. Završna obrada ploča nogara i radne ploče je melaminska folija u dezenu hrast natur (tipa kao EGGER H1318 ST10, Falco 577 Sonoma svetli hrast ili sl). i u beloj boji (tipa EGGER W954 ST2, Falco YI121 FS01 ili sl.). Sve ivice su kantovane ABS trakom 2 mm u dezenu kao i ploče. Radna ploča se na nogare oslanja preko dekorativnih metalnih distancera u beloj boji na četiri mesta. Nogari stola su oslonjeni na pod preko stopica za nivelaciju. Sve elemente međusobno spajati lepkom za drvo, tiplovanjem i šrafljenjem. | Procurement of materials, production, transport and installation of a work table in offices. A desk with dimensions of 150x80 cm, height 75 cm, made of 25 mm thick plywood legs and a 25 mm thick worktop. The finishing of the legs and worktop is aluminium foil in a natural oak pattern (such as EGGER H1318 ST10, Falco 577 Sonoma light oak, or similar) and in white color (such as EGGER W954 ST2, Falco YI121 FS01 or similar). All edges are edged with ABS tape 2 mm in the same pattern as the panels. The worktop rests on the legs supported by decorative metal spacers in white in four places. The table legs rest on the floor supported by leveling feet. Connect all elements together with wood glue, doweling and screwing. | kom./ units | 5 | 0 | 0 | 0 RS 2.2 | radna stolica/ chair | Čelik / furnir/ steel/veneer | Nabavka materijala, izrada, transport i montaža radne stolice u kancelarijama. Kancelarijska stolica je sa točkićima okvirnih dimenzija 51x78-82x59cm. Sedalni deo, kao i naslon stolice od šperploče presvučen tkaninom u neutralnim tonovima (bež, pesak, siva, drap ) - poliester sa punjenjem od poliuretanske pene gustine 25 kg/m³. Stolica ima zvezdastu bazu od čelika sa nogama od čelika u beloj boji. Stolica ima opciju podešavanja visine, gasni mehanizam i točkiće. Visina sedišta 46-50cm. Dubina sedišta okvirno 41cm. | Procurement of materials, production, transport and assembly of chairs in offices. The chair has castors with frame dimensions of 51x78-82x59cm. The seat part, as well as the backrest of the chair, are made of plywood covered with fabric in neutral tones (beige, sand, gray, drape) - polyester with filling made of polyurethane foam with a density of 25 kg/m³. The chair has a star-shaped steel base with white steel legs. The chair has the option of height adjustment, gas mechanism, and wheels. Seat height 46-50cm. Seat depth is approximately 41cm. | kom./ units | 6 | 0 | 0 | 0 RS 2.3 | radni sto/ desk 140*65 | Univer/ plywood | Nabavka materijala, izrada, transport i montaža radnog stola u kancelarijama. Radni sto dimenzija 140x65cm, visine 75cm, napravljen od nogara od univer ploča debljine 25mm i radne ploče od univera ploče debljine 25mm. Završna obrada ploča nogara i radne ploče je melaminska folija u dezenu hrast natur (tipa kao EGGER H1318 ST10, Falco 577 Sonoma svetli hrast ili sl). i u beloj boji (tipa EGGER W954 ST2, Falco YI121 FS01 ili sl.). Sve ivice su kantovane ABS trakom 2 mm u dezenu kao i ploče. Radna ploča se na nogare oslanja preko dekorativnih metalnih distancera u beloj boji na četiri mesta. Nogari stola su oslonjeni na pod preko stopica za nivelaciju. Sve elemente međusobno spajati lepkom za drvo, tiplovanjem i šrafljenjem. | Procurement of materials, production, transport and installation of a desk in offices. Desk with dimensions 140x65cm, height 75cm, made of 25mm thick plywood board legs and 25mm thick plywood board worktop. The finish of the leg plates and the worktop is aluminium foil in a natural oak pattern (such as EGGER H1318 ST10, Falco 577 Sonoma light oak, or similar) and in white color (type EGGER W954 ST2, Falco YI121 FS01 or similar). All edges are edged with 2 mm ABS tape in the same pattern as the panels. The worktop rests on the legs supported by decorative white metal spacers in four places. The table legs are supported on the floor by means of leveling feet. Connect all elements together with wood glue, doweling and screwing. | kom./ units | 1 | 0 | 0 | 0 PL 2.1 | orman za odlaganje dokumentacije/ cabinet for storing documentation 85x58x220cm | Univer/ plywood | Nabavka materijala, izrada, transport i montaža ormana u kancelarijama. Orman u kancelarijama je dvokrilni, dimenzija 85x57x220cm. Korpus ormana kao i frontovi su izrađeni od univera d=18mm oplemenjenog melaminskom folijom i kantovanog ABS trakom u beloj boji 22/2mm (tipa EGGER W954 ST2 , Falco YI121 FS01 ili sl.). Leđa ormana su izrađena od HDF-a (lesonita) debljine 3mm u beloj boji. Police su od univera debljine 18 mm u beloj boji a nosači polica su metalni sa metalnim šiljkom i euro vijkom-za vezu sa stranicom korpusa. Broj polica unutar ormana je 4 (četiri) i postavljene su na pravilnim razmacima. Na bočnim stranama predvideti veći broj otvora za nosače polica na rastojanju od 10cm radi mogućnsti pomeranja polica prema potrebi. Orman snabdeti ravnim šarkama bez usporivača, testiranim na 100 000 otvaranja, renomiranih proizvođača tipa ,,Blum'', ,,HAFELE'' (ili odgovarajuće). Vrata ormana se otvaraju pomoću skrivene Al ručice-profila plastificirane u boji RAL 9010 dužine 50cm. Sve elemente ormana međusobno spajati lepkom za drvo, tiplovanjem ili šrafljenjem. Orman je oslonjen na pod preko skrivenih štelujućih PVC nogara, 4 na uglovima i jedne ispod unutrašnje vertikalne pregrade ormana. PVC nogari se skrivaju postavljanjem PVC sokle visine 10cm, sa prednje i obe bočne strane ormara koja se pričvršćuje žabicama za nogare. | Procurement of materials, production, transport and installation of cabinets in offices. The cabinet in the offices is double-winged, with dimensions 85x57x220cm. The body of the cabinet as well as the fronts are made of plywood 18mm refined with aluminium foil and edged with ABS tape in white color 22/2mm (EGGER type) W954 ST2, Falco YI121 FS01 or similar). The back of the cabinet is made of 3mm thick HDF (hardboard) in white. The shelves are made of 18 mm thick plywood in white and the shelf supports are metal with a metal spike and a euro screw- for the connection with the side of the body. The number of shelves inside the cabinet is 4 (four) and they are placed at regular intervals. On the sides, provide a larger number of openings for shelf supports at a distance of 10 cm for the possibility of moving the shelves as needed. The cabinet should be equipped with flat hinges with non-slowing elements, tested for 100,000 openings, from renowned manufacturers such as "Blum", and "HAFELE" (o